CVE-2026-71300 Vulnerability Analysis & Exploit Details

CVE-2026-71300 Vulnerability Summary

CVE-2026-71300: Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.

CVE-2026-71300 References

External References

• https://camel.apache.org/security/CVE-2026-71300.html

CWE Common Weakness Enumeration

CAPEC Common Attack Pattern Enumeration and Classification

• Buffer Overflow via Environment Variables CAPEC-10 This attack pattern involves causing a buffer overflow through manipulation of environment variables. Once the adversary finds that they can modify an environment variable, they may try to overflow associated buffers. This attack leverages implicit trust often placed in environment variables.
• Server Side Include (SSI) Injection CAPEC-101 An attacker can use Server Side Include (SSI) Injection to send code to a web application that then gets executed by the web server. Doing so enables the attacker to achieve similar results to Cross Site Scripting, viz., arbitrary code execution and information disclosure, albeit on a more limited scale, since the SSI directives are nowhere near as powerful as a full-fledged scripting language. Nonetheless, the attacker can conveniently gain access to sensitive files, such as password files, and execute shell commands.
• Cross Zone Scripting CAPEC-104 An attacker is able to cause a victim to load content into their web-browser that bypasses security zone controls and gain access to increased privileges to execute scripting code or other web objects such as unsigned ActiveX controls or applets. This is a privilege elevation attack targeted at zone-based web-browser security.
• Command Line Execution through SQL Injection CAPEC-108 An attacker uses standard SQL injection methods to inject data into the command line for execution. This could be done directly through misuse of directives such as MSSQL_xp_cmdshell or indirectly through injection of data into the database that would be interpreted as shell commands. Sometime later, an unscrupulous backend application (or could be part of the functionality of the same application) fetches the injected data stored in the database and uses this data as command line arguments without performing proper validation. The malicious data escapes that data plane by spawning new commands to be executed on the host.
• Object Relational Mapping Injection CAPEC-109 An attacker leverages a weakness present in the database access layer code generated with an Object Relational Mapping (ORM) tool or a weakness in the way that a developer used a persistence framework to inject their own SQL commands to be executed against the underlying database. The attack here is similar to plain SQL injection, except that the application does not use JDBC to directly talk to the database, but instead it uses a data access layer generated by an ORM tool or framework (e.g. Hibernate). While most of the time code generated by an ORM tool contains safe access methods that are immune to SQL injection, sometimes either due to some weakness in the generated code or due to the fact that the developer failed to use the generated access methods properly, SQL injection is still possible.
• SQL Injection through SOAP Parameter Tampering CAPEC-110 An attacker modifies the parameters of the SOAP message that is sent from the service consumer to the service provider to initiate a SQL injection attack. On the service provider side, the SOAP message is parsed and parameters are not properly validated before being used to access a database in a way that does not use parameter binding, thus enabling the attacker to control the structure of the executed SQL query. This pattern describes a SQL injection attack with the delivery mechanism being a SOAP message.
• Double Encoding CAPEC-120 The adversary utilizes a repeating of the encoding process for a set of characters (that is, character encoding a character encoding of a character) to obfuscate the payload of a particular request. This may allow the adversary to bypass filters that attempt to detect illegal characters or strings, such as those that might be used in traversal or injection attacks. Filters may be able to catch illegal encoded strings, but may not catch doubly encoded strings. For example, a dot (.), often used in path traversal attacks and therefore often blocked by filters, could be URL encoded as %2E. However, many filters recognize this encoding and would still block the request. In a double encoding, the % in the above URL encoding would be encoded again as %25, resulting in %252E which some filters might not catch, but which could still be interpreted as a dot (.) by interpreters on the target.
• Subverting Environment Variable Values CAPEC-13 The adversary directly or indirectly modifies environment variables used by or controlling the target software. The adversary's goal is to cause the target software to deviate from its expected operation in a manner that benefits the adversary.
• Format String Injection CAPEC-135 An adversary includes formatting characters in a string input field on the target application. Most applications assume that users will provide static text and may respond unpredictably to the presence of formatting character. For example, in certain functions of the C programming languages such as printf, the formatting character %s will print the contents of a memory location expecting this location to identify a string and the formatting character %n prints the number of DWORD written in the memory. An adversary can use this to read or write to memory locations or files, or simply to manipulate the value of the resulting text in unexpected ways. Reading or writing memory may result in program crashes and writing memory could result in the execution of arbitrary code if the adversary can write to the program stack.
• LDAP Injection CAPEC-136 An attacker manipulates or crafts an LDAP query for the purpose of undermining the security of the target. Some applications use user input to create LDAP queries that are processed by an LDAP server. For example, a user might provide their username during authentication and the username might be inserted in an LDAP query during the authentication process. An attacker could use this input to inject additional commands into an LDAP query that could disclose sensitive information. For example, entering a * in the aforementioned query might return information about all users on the system. This attack is very similar to an SQL injection attack in that it manipulates a query to gather additional information or coerce a particular return value.
• Client-side Injection-induced Buffer Overflow CAPEC-14 This type of attack exploits a buffer overflow vulnerability in targeted client software through injection of malicious content from a custom-built hostile service. This hostile service is created to deliver the correct content to the client software. For example, if the client-side application is a browser, the service will host a webpage that the browser loads.
• Input Data Manipulation CAPEC-153 An attacker exploits a weakness in input validation by controlling the format, structure, and composition of data to an input-processing interface. By supplying input of a non-standard or unexpected form an attacker can adversely impact the security of the target.
• Flash Injection CAPEC-182 An attacker tricks a victim to execute malicious flash content that executes commands or makes flash calls specified by the attacker. One example of this attack is cross-site flashing, an attacker controlled parameter to a reference call loads from content specified by the attacker.
• XSS Using MIME Type Mismatch CAPEC-209 An adversary creates a file with scripting content but where the specified MIME type of the file is such that scripting is not expected. The adversary tricks the victim into accessing a URL that responds with the script file. Some browsers will detect that the specified MIME type of the file does not match the actual type of its content and will automatically switch to using an interpreter for the real content type. If the browser does not invoke script filters before doing this, the adversary's script may run on the target unsanitized, possibly revealing the victim's cookies or executing arbitrary script in their browser.
• Exploiting Trust in Client CAPEC-22 An attack of this type exploits vulnerabilities in client/server communication channel authentication and data integrity. It leverages the implicit trust a server places in the client, or more importantly, that which the server believes is the client. An attacker executes this type of attack by communicating directly with the server where the server believes it is communicating only with a valid client. There are numerous variations of this type of attack.
• File Content Injection CAPEC-23 An adversary poisons files with a malicious payload (targeting the file systems accessible by the target software), which may be passed through by standard channels such as via email, and standard web content like PDF and multimedia files. The adversary exploits known vulnerabilities or handling routines in the target processes, in order to exploit the host's trust in executing remote content, including binary files.
• Serialized Data with Nested Payloads CAPEC-230 Applications often need to transform data in and out of a data format (e.g., XML and YAML) by using a parser. It may be possible for an adversary to inject data that may have an adverse effect on the parser when it is being processed. Many data format languages allow the definition of macro-like structures that can be used to simplify the creation of complex structures. By nesting these structures, causing the data to be repeatedly substituted, an adversary can cause the parser to consume more resources while processing, causing excessive memory consumption and CPU utilization.
• Oversized Serialized Data Payloads CAPEC-231 An adversary injects oversized serialized data payloads into a parser during data processing to produce adverse effects upon the parser such as exhausting system resources and arbitrary code execution.
• Filter Failure through Buffer Overflow CAPEC-24 In this attack, the idea is to cause an active filter to fail by causing an oversized transaction. An attacker may try to feed overly long input strings to the program in an attempt to overwhelm the filter (by causing a buffer overflow) and hoping that the filter does not fail securely (i.e. the user input is let into the system unfiltered).
• XML Injection CAPEC-250 An attacker utilizes crafted XML user-controllable input to probe, attack, and inject data into the XML database, using techniques similar to SQL injection. The user-controllable input can allow for unauthorized viewing of data, bypassing authentication or the front-end application for direct XML database access, and possibly altering database information.
• Fuzzing for garnering other adjacent user/sensitive data CAPEC-261 An adversary who is authorized to send queries to a target sends variants of expected queries in the hope that these modified queries might return information (directly or indirectly through error logs) beyond what the expected set of queries should provide.
• Leverage Alternate Encoding CAPEC-267 An adversary leverages the possibility to encode potentially harmful input or content used by applications such that the applications are ineffective at validating this encoding standard.
• Fuzzing CAPEC-28 In this attack pattern, the adversary leverages fuzzing to try to identify weaknesses in the system. Fuzzing is a software security and functionality testing method that feeds randomly constructed input to the system and looks for an indication that a failure in response to that input has occurred. Fuzzing treats the system as a black box and is totally free from any preconceptions or assumptions about the system. Fuzzing can help an attacker discover certain assumptions made about user input in the system. Fuzzing gives an attacker a quick way of potentially uncovering some of these assumptions despite not necessarily knowing anything about the internals of the system. These assumptions can then be turned against the system by specially crafting user input that may allow an attacker to achieve their goals.
• Using Leading 'Ghost' Character Sequences to Bypass Input Filters CAPEC-3 Some APIs will strip certain leading characters from a string of parameters. An adversary can intentionally introduce leading "ghost" characters (extra characters that don't affect the validity of the request at the API layer) that enable the input to pass the filters and therefore process the adversary's input. This occurs when the targeted API will accept input data in several syntactic forms and interpret it in the equivalent semantic way, while the filter does not take into account the full spectrum of the syntactic forms acceptable to the targeted API.
• Accessing/Intercepting/Modifying HTTP Cookies CAPEC-31 This attack relies on the use of HTTP Cookies to store credentials, state information and other critical data on client systems. There are several different forms of this attack. The first form of this attack involves accessing HTTP Cookies to mine for potentially sensitive data contained therein. The second form involves intercepting this data as it is transmitted from client to server. This intercepted information is then used by the adversary to impersonate the remote user/session. The third form is when the cookie's content is modified by the adversary before it is sent back to the server. Here the adversary seeks to convince the target server to operate on this falsified information.
• MIME Conversion CAPEC-42 An attacker exploits a weakness in the MIME conversion routine to cause a buffer overflow and gain control over the mail server machine. The MIME system is designed to allow various different information formats to be interpreted and sent via e-mail. Attack points exist when data are converted to MIME compatible format and back.
• Exploiting Multiple Input Interpretation Layers CAPEC-43 An attacker supplies the target software with input data that contains sequences of special characters designed to bypass input validation logic. This exploit relies on the target making multiples passes over the input data and processing a "layer" of special characters with each pass. In this manner, the attacker can disguise input that would otherwise be rejected as invalid by concealing it with layers of special/escape characters that are stripped off by subsequent processing steps. The goal is to first discover cases where the input validation layer executes before one or more parsing layers. That is, user input may go through the following logic in an application: <parser1> --> <input validator> --> <parser2>. In such cases, the attacker will need to provide input that will pass through the input validator, but after passing through parser2, will be converted into something that the input validator was supposed to stop.
• Buffer Overflow via Symbolic Links CAPEC-45 This type of attack leverages the use of symbolic links to cause buffer overflows. An adversary can try to create or manipulate a symbolic link file such that its contents result in out of bounds data. When the target software processes the symbolic link file, it could potentially overflow internal buffers with insufficient bounds checking.
• Overflow Variables and Tags CAPEC-46 This type of attack leverages the use of tags or variables from a formatted configuration data to cause buffer overflow. The adversary crafts a malicious HTML page or configuration file that includes oversized strings, thus causing an overflow.
• Buffer Overflow via Parameter Expansion CAPEC-47 In this attack, the target software is given input that the adversary knows will be modified and expanded in size during processing. This attack relies on the target software failing to anticipate that the expanded data may exceed some internal limit, thereby creating a buffer overflow.
• Signature Spoof CAPEC-473 An attacker generates a message or datablock that causes the recipient to believe that the message or datablock was generated and cryptographically signed by an authoritative or reputable source, misleading a victim or victim operating system into performing malicious actions.
• Embedding NULL Bytes CAPEC-52 An adversary embeds one or more null bytes in input to the target software. This attack relies on the usage of a null-valued byte as a string terminator in many environments. The goal is for certain components of the target software to stop processing the input when it encounters the null byte(s).
• Postfix, Null Terminate, and Backslash CAPEC-53 If a string is passed through a filter of some kind, then a terminal NULL may not be valid. Using alternate representation of NULL allows an adversary to embed the NULL mid-string while postfixing the proper data so that the filter is avoided. One example is a filter that looks for a trailing slash character. If a string insertion is possible, but the slash must exist, an alternate encoding of NULL in mid-string may be used.
• DOM-Based XSS CAPEC-588 This type of attack is a form of Cross-Site Scripting (XSS) where a malicious script is inserted into the client-side HTML being parsed by a web browser. Content served by a vulnerable web application includes script code used to manipulate the Document Object Model (DOM). This script code either does not properly validate input, or does not perform proper output encoding, thus creating an opportunity for an adversary to inject a malicious script launch a XSS attack. A key distinction between other XSS attacks and DOM-based attacks is that in other XSS attacks, the malicious script runs when the vulnerable web page is initially loaded, while a DOM-based attack executes sometime after the page loads. Another distinction of DOM-based attacks is that in some cases, the malicious script is never sent to the vulnerable web server at all. An attack like this is guaranteed to bypass any server-side filtering attempts to protect users.
• Cross-Site Scripting (XSS) CAPEC-63 An adversary embeds malicious scripts in content that will be served to web browsers. The goal of the attack is for the target software, the client-side browser, to execute the script with the users' privilege level. An attack of this type exploits a programs' vulnerabilities that are brought on by allowing remote hosts to execute code and scripts. Web browsers, for example, have some simple security controls in place, but if a remote attacker is allowed to execute scripts (through injecting them in to user-generated content like bulletin boards) then these controls may be bypassed. Further, these attacks are very difficult for an end user to detect.
• Using Slashes and URL Encoding Combined to Bypass Validation Logic CAPEC-64 This attack targets the encoding of the URL combined with the encoding of the slash characters. An attacker can take advantage of the multiple ways of encoding a URL and abuse the interpretation of the URL. A URL may contain special character that need special syntax handling in order to be interpreted. Special characters are represented using a percentage character followed by two digits representing the octet code of the original character (%HEX-CODE). For instance US-ASCII space character would be represented with %20. This is often referred as escaped ending or percent-encoding. Since the server decodes the URL from the requests, it may restrict the access to some URL paths by validating and filtering out the URL requests it received. An attacker will try to craft an URL with a sequence of special characters which once interpreted by the server will be equivalent to a forbidden URL. It can be difficult to protect against this attack since the URL can contain other format of encoding such as UTF-8 encoding, Unicode-encoding, etc.
• Server Side Request Forgery CAPEC-664 An adversary exploits improper input validation by submitting maliciously crafted input to a target application running on a server, with the goal of forcing the server to make a request either to itself, to web services running in the server’s internal network, or to external third parties. If successful, the adversary’s request will be made with the server’s privilege level, bypassing its authentication controls. This ultimately allows the adversary to access sensitive data, execute commands on the server’s network, and make external requests with the stolen identity of the server. Server Side Request Forgery attacks differ from Cross Site Request Forgery attacks in that they target the server itself, whereas CSRF attacks exploit an insecure user authentication mechanism to perform unauthorized actions on the user's behalf.
• String Format Overflow in syslog() CAPEC-67 This attack targets applications and software that uses the syslog() function insecurely. If an application does not explicitely use a format string parameter in a call to syslog(), user input can be placed in the format string parameter leading to a format string injection attack. Adversaries can then inject malicious format string commands into the function call leading to a buffer overflow. There are many reported software vulnerabilities with the root cause being a misuse of the syslog() function.
• Blind SQL Injection CAPEC-7 Blind SQL Injection results from an insufficient mitigation for SQL Injection. Although suppressing database error messages are considered best practice, the suppression alone is not sufficient to prevent SQL Injection. Blind SQL Injection is a form of SQL Injection that overcomes the lack of error messages. Without the error messages that facilitate SQL Injection, the adversary constructs input strings that probe the target through simple Boolean SQL expressions. The adversary can determine if the syntax and structure of the injection was successful based on whether the query was executed or not. Applied iteratively, the adversary determines how and where the target is vulnerable to SQL Injection.
• Using Unicode Encoding to Bypass Validation Logic CAPEC-71 An attacker may provide a Unicode string to a system component that is not Unicode aware and use that to circumvent the filter or cause the classifying mechanism to fail to properly understanding the request. That may allow the attacker to slip malicious data past the content filter and/or possibly cause the application to route the request incorrectly.
• URL Encoding CAPEC-72 This attack targets the encoding of the URL. An adversary can take advantage of the multiple way of encoding an URL and abuse the interpretation of the URL.
• User-Controlled Filename CAPEC-73 An attack of this type involves an adversary inserting malicious characters (such as a XSS redirection) into a filename, directly or indirectly that is then used by the target software to generate HTML text or other potentially executable content. Many websites rely on user-generated content and dynamically build resources like files, filenames, and URL links directly from user supplied data. In this attack pattern, the attacker uploads code that can execute in the client browser and/or redirect the client browser to a site that the attacker owns. All XSS attack payload variants can be used to pass and exploit these vulnerabilities.
• Using Escaped Slashes in Alternate Encoding CAPEC-78 This attack targets the use of the backslash in alternate encoding. An adversary can provide a backslash as a leading character and causes a parser to believe that the next character is special. This is called an escape. By using that trick, the adversary tries to exploit alternate ways to encode the same character which leads to filter problems and opens avenues to attack.
• Using Slashes in Alternate Encoding CAPEC-79 This attack targets the encoding of the Slash characters. An adversary would try to exploit common filtering problems related to the use of the slashes characters to gain access to resources on the target host. Directory-driven systems, such as file systems and databases, typically use the slash character to indicate traversal between directories or other container components. For murky historical reasons, PCs (and, as a result, Microsoft OSs) choose to use a backslash, whereas the UNIX world typically makes use of the forward slash. The schizophrenic result is that many MS-based systems are required to understand both forms of the slash. This gives the adversary many opportunities to discover and abuse a number of common filtering problems. The goal of this pattern is to discover server software that only applies filters to one version, but not the other.
• Buffer Overflow in an API Call CAPEC-8 This attack targets libraries or shared code modules which are vulnerable to buffer overflow attacks. An adversary who has knowledge of known vulnerable libraries or shared code can easily target software that makes use of these libraries. All clients that make use of the code library thus become vulnerable by association. This has a very broad effect on security across a system, usually affecting more than one software process.
• Using UTF-8 Encoding to Bypass Validation Logic CAPEC-80 This attack is a specific variation on leveraging alternate encodings to bypass validation logic. This attack leverages the possibility to encode potentially harmful input in UTF-8 and submit it to applications not expecting or effective at validating this encoding standard making input filtering difficult. UTF-8 (8-bit UCS/Unicode Transformation Format) is a variable-length character encoding for Unicode. Legal UTF-8 characters are one to four bytes long. However, early version of the UTF-8 specification got some entries wrong (in some cases it permitted overlong characters). UTF-8 encoders are supposed to use the "shortest possible" encoding, but naive decoders may accept encodings that are longer than necessary. According to the RFC 3629, a particularly subtle form of this attack can be carried out against a parser which performs security-critical validity checks against the UTF-8 encoded form of its input, but interprets certain illegal octet sequences as characters.
• Web Server Logs Tampering CAPEC-81 Web Logs Tampering attacks involve an attacker injecting, deleting or otherwise tampering with the contents of web logs typically for the purposes of masking other malicious behavior. Additionally, writing malicious data to log files may target jobs, filters, reports, and other agents that process the logs in an asynchronous attack pattern. This pattern of attack is similar to "Log Injection-Tampering-Forging" except that in this case, the attack is targeting the logs of the web server and not the application.
• XPath Injection CAPEC-83 An attacker can craft special user-controllable input consisting of XPath expressions to inject the XML database and bypass authentication or glean information that they normally would not be able to. XPath Injection enables an attacker to talk directly to the XML database, thus bypassing the application completely. XPath Injection results from the failure of an application to properly sanitize input used as part of dynamic XPath expressions used to query an XML database.
• AJAX Footprinting CAPEC-85 This attack utilizes the frequent client-server roundtrips in Ajax conversation to scan a system. While Ajax does not open up new vulnerabilities per se, it does optimize them from an attacker point of view. A common first step for an attacker is to footprint the target environment to understand what attacks will work. Since footprinting relies on enumeration, the conversational pattern of rapid, multiple requests and responses that are typical in Ajax applications enable an attacker to look for many vulnerabilities, well-known ports, network locations and so on. The knowledge gained through Ajax fingerprinting can be used to support other attacks, such as XSS.
• OS Command Injection CAPEC-88 In this type of an attack, an adversary injects operating system commands into existing application functions. An application that uses untrusted input to build command strings is vulnerable. An adversary can leverage OS command injection in an application to elevate privileges, execute arbitrary commands and compromise the underlying operating system.
• Buffer Overflow in Local Command-Line Utilities CAPEC-9 This attack targets command-line utilities available in a number of shells. An adversary can leverage a vulnerability found in a command-line utility to escalate privilege to root.

Vulnerable Configurations

• cpe:2.3:a:apache:camel:4.0.0:-:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:-:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.0:rc1:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:rc1:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.0:rc2:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:rc2:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.0:milestone1:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:milestone1:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.0:milestone2:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:milestone2:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.0:milestone3:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.0:milestone3:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.4:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.4:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.5:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.5:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.0.6:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.0.6:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.1.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.1.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.2.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.2.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.3.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.3.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.2:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.2:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.3:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.3:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.4:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.4:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.4.5:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.4.5:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.5.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.5.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.6.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.6.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.7.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.7.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.2:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.2:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.3:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.3:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.4:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.4:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.5:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.5:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.6:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.6:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.7:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.7:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.8:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.8:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.8.9:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.8.9:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.9.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.9.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.2:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.2:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.3:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.3:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.4:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.4:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.5:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.5:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.6:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.6:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.7:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.7:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.8:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.8:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.10.9:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.10.9:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.11.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.11.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.12.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.12.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.13.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.13.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.2:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.2:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.3:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.3:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.4:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.4:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.5:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.5:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.6:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.6:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.7:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.7:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.14.8:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.14.8:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.15.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.15.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.16.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.16.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.17.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.17.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.17.0.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.17.0.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.18.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.18.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.18.1:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.18.1:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.18.2:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.18.2:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.18.3:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.18.3:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.19.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.19.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.20.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.20.0:*:*:*:*:*:*:*
• cpe:2.3:a:apache:camel:4.21.0:*:*:*:*:*:*:*
  cpe:2.3:a:apache:camel:4.21.0:*:*:*:*:*:*:*

Other 5 Recently Published CVEs Vulnerabilities

• CVE-2026-95512 – A flaw was found in FreeType, specifically within its CID font loader. A remote attacker could exploit this vulnerability by tricking a user into o...
• CVE-2026-91784 – cjbassi/gotop is vulnerable to local argument injection via process termination functionality. The process name is passed directly to pkill without...
• CVE-2026-80464 – Server-Side request forgery (SSRF) vulnerability in HAVELSAN Inc. Sef - AI Chatbot Platform allows Server Side Request Forgery. This issue affects...
• CVE-2026-80443 – Improper certificate validation vulnerability in HAVELSAN Inc. Sef - AI Chatbot Platform allows Adversary in the Middle (AiTM). This issue affects...
• CVE-2026-80337 – Missing Authorization vulnerability in HAVELSAN Inc. Sef - AI Chatbot Platform allows Accessing Functionality Not Properly Constrained by ACLs. Th...