w1.fi CVE Vulnerabilities & Metrics

An issue was discovered in Ubuntu wpa_supplicant that resulted in loading of arbitrary shared objects, which allows a local unprivileged attacker to escalate privileges to the user that wpa_supplicant runs as (usually root). Membership in the netdev group or access to the dbus interface of wpa_supplicant allow an unprivileged user to specify an arbitrary path to a module to be loaded by the wpa_supplicant process; other escalation paths might exist.

The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks.

The implementations of EAP-pwd in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side-channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9495.

The implementations of SAE in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9494.

In wpa_supplicant and hostapd 2.9, forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c.

A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range.

The Open Connectivity Foundation UPnP specification before 2020-04-17 does not forbid the acceptance of a subscription request with a delivery URL on a different network segment than the fully qualified event-subscription URL, aka the CallStranger issue.

hostapd before 2.6, in EAP mode, makes calls to the rand() and random() standard library functions without any preceding srand() or srandom() call, which results in inappropriate use of deterministic values. This was fixed in conjunction with CVE-2016-10743.

An exploitable denial-of-service vulnerability exists in the 802.11w security state handling for hostapd 2.6 connected clients with valid 802.11w sessions. By simulating an incomplete new association, an attacker can trigger a deauthentication against stations using 802.11w, resulting in a denial of service.

An exploitable denial-of-service vulnerability exists in the hostapd 2.6, where an attacker could trigger AP to send IAPP location updates for stations, before the required authentication process has completed. This could lead to different denial of service scenarios, either by causing CAM table attacks, or by leading to traffic flapping if faking already existing clients in other nearby Aps of the same wireless infrastructure. An attacker can forge Authentication and Association Request packets to trigger this vulnerability.

hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mishandled. This is a denial of service that should have been prevented by PMF (aka management frame protection). The attacker must send a crafted 802.11 frame from a location that is within the 802.11 communications range.

The implementations of SAE and EAP-pwd in hostapd and wpa_supplicant 2.x through 2.8 are vulnerable to side-channel attacks as a result of observable timing differences and cache access patterns when Brainpool curves are used. An attacker may be able to gain leaked information from a side-channel attack that can be used for full password recovery.

The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be received. This could result in process termination due to a NULL pointer dereference (denial of service). This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c.

The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may complete authentication, session key and control of the data connection with a client. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may be able to use invalid scalar/element values to complete authentication, gaining session key and network access without needing or learning the password. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

An invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode. All version of hostapd with SAE support are vulnerable. An attacker may force the hostapd process to terminate, performing a denial of service attack. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.

The implementations of EAP-PWD in hostapd and wpa_supplicant are vulnerable to side-channel attacks as a result of cache access patterns. All versions of hostapd and wpa_supplicant with EAP-PWD support are vulnerable. The ability to install and execute applications is necessary for a successful attack. Memory access patterns are visible in a shared cache. Weak passwords may be cracked. Versions of hostapd/wpa_supplicant 2.7 and newer, are not vulnerable to the timing attack described in CVE-2019-9494. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a result of observable timing differences and cache access patterns. An attacker may be able to gain leaked information from a side channel attack that can be used for full password recovery. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.

hostapd before 2.6 does not prevent use of the low-quality PRNG that is reached by an os_random() function call.

An issue was discovered in rsn_supp/wpa.c in wpa_supplicant 2.0 through 2.6. Under certain conditions, the integrity of EAPOL-Key messages is not checked, leading to a decryption oracle. An attacker within range of the Access Point and client can abuse the vulnerability to recover sensitive information.

The eap_pwd_perform_confirm_exchange function in eap_peer/eap_pwd.c in wpa_supplicant 2.x before 2.6, when EAP-pwd is enabled in a network configuration profile, allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an EAP-pwd Confirm message followed by the Identity exchange.

The eap_pwd_process function in eap_peer/eap_pwd.c in wpa_supplicant 2.x before 2.6 does not validate that the reassembly buffer is large enough for the final fragment when EAP-pwd is enabled in a network configuration profile, which allows remote attackers to cause a denial of service (process termination) via a large final fragment in an EAP-pwd message.

The eap_pwd_process function in eap_server/eap_server_pwd.c in hostapd 2.x before 2.6 does not validate that the reassembly buffer is large enough for the final fragment when used with (1) an internal EAP server or (2) a RADIUS server and EAP-pwd is enabled in a runtime configuration, which allows remote attackers to cause a denial of service (process termination) via a large final fragment in an EAP-pwd message.

Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Integrity Group Temporal Key (IGTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker within radio range to replay frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Group Temporal Key (GTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker within radio range to replay frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Tunneled Direct-Link Setup (TDLS) Peer Key (TPK) during the TDLS handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Station-To-Station-Link (STSL) Transient Key (STK) during the PeerKey handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11r allows reinstallation of the Pairwise Transient Key (PTK) Temporal Key (TK) during the fast BSS transmission (FT) handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity Group Temporal Key (IGTK) during the group key handshake, allowing an attacker within radio range to spoof frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the group key handshake, allowing an attacker within radio range to replay frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity Group Temporal Key (IGTK) during the four-way handshake, allowing an attacker within radio range to spoof frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the four-way handshake, allowing an attacker within radio range to replay frames from access points to clients.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Pairwise Transient Key (PTK) Temporal Key (TK) during the four-way handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

wpa_supplicant 2.0-16 does not properly check certificate subject name, which allows remote attackers to cause a man-in-the-middle attack.

hostapd 0.6.7 through 2.5 and wpa_supplicant 0.6.7 through 2.5 do not reject \n and \r characters in passphrase parameters, which allows remote attackers to cause a denial of service (daemon outage) via a crafted WPS operation.

Multiple integer overflows in the NDEF record parser in hostapd before 2.5 and wpa_supplicant before 2.5 allow remote attackers to cause a denial of service (process crash or infinite loop) via a large payload length field value in an (1) WPS or (2) P2P NFC NDEF record, which triggers an out-of-bounds read.

The EAP-pwd peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not clear the L (Length) and M (More) flags before determining if a response should be fragmented, which allows remote attackers to cause a denial of service (crash) via a crafted message.

The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not validate a fragment is already being processed, which allows remote attackers to cause a denial of service (memory leak) via a crafted message.

The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not validate that a message is long enough to contain the Total-Length field, which allows remote attackers to cause a denial of service (crash) via a crafted message.

The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 allows remote attackers to cause a denial of service (out-of-bounds read and crash) via a crafted (1) Commit or (2) Confirm message payload.

Integer underflow in the WMM Action frame parser in hostapd 0.5.5 through 2.4 and wpa_supplicant 0.7.0 through 2.4, when used for AP mode MLME/SME functionality, allows remote attackers to cause a denial of service (crash) via a crafted frame, which triggers an out-of-bounds read.

The WPS UPnP function in hostapd, when using WPS AP, and wpa_supplicant, when using WPS external registrar (ER), 0.7.0 through 2.4 allows remote attackers to cause a denial of service (crash) via a negative chunk length, which triggers an out-of-bounds read or heap-based buffer overflow.

Heap-based buffer overflow in wpa_supplicant 1.0 through 2.4 allows remote attackers to cause a denial of service (crash), read memory, or possibly execute arbitrary code via crafted SSID information in a management frame when creating or updating P2P entries.

wpa_supplicant and hostapd 0.7.2 through 2.2, when running with certain configurations and using wpa_cli or hostapd_cli with action scripts, allows remote attackers to execute arbitrary commands via a crafted frame.

Heap-based buffer overflow in the eap_server_tls_process_fragment function in eap_server_tls_common.c in the EAP authentication server in hostapd 0.6 through 1.0 allows remote attackers to cause a denial of service (crash or abort) via a small "TLS Message Length" value in an EAP-TLS message with the "More Fragments" flag set.

hostapd 0.7.3, and possibly other versions before 1.0, uses 0644 permissions for /etc/hostapd/hostapd.conf, which might allow local users to obtain sensitive information such as credentials.