trustedfirmware CVE Vulnerabilities & Metrics

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.3.0 and prior to version 4.11.0, a type confusion vulnerability exists in OP-TEE OS when processing an FFA_MEM_SHARE request from the normal world. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_CORE_SEL1_SPMC=y` and `CFG_SECURE_PARTITION=y`. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Prior to version 4.11.0, on many of the ECDH shared secret paths, the public key isn't verified to be a point on the correct curve. By passing approximately 30-40 crafted public keys to OP-TEE, the private key can be reconstructed by a normal world attacker. When calling TEE_DeriveKey the public key is provided with full X and Y values, but the (X, Y) point might not satisfy the `Y^2 == X^3 + aX + b mod P` math for the specific curve that is used. When those public keys aren't rejected, the attacker can select public keys such that each DeriveKey call will leak `d % r` where `d` is the private key and `r` comes from the relationship between the correct curve and the attacker selected curve. With enough leaked data the Chinese remainder theorem can be used to recover the full private key. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. From 3.8.0 to 4.10, in the function emsa_pkcs1_v1_5_encode() in core/drivers/crypto/crypto_api/acipher/rsassa.c, the amount of padding needed, "PS size", is calculated by subtracting the size of the digest and other fields required for the EMA-PKCS1-v1_5 encoding from the size of the modulus of the key. By selecting a small enough modulus, this subtraction can overflow. The padding is added as a string of 0xFF bytes with a call to memset(), and an underflowed integer will cause the memset() call to overwrite until OP-TEE crashes. This only affects platforms registering RSA acceleration.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In versions 3.13.0 through 4.10.0, missing checks in `entry_get_attribute_value()` in `ta/pkcs11/src/object.c` can lead to out-of-bounds read from the PKCS#11 TA heap or a crash. When chained with the OOB read, the PKCS#11 TA function `PKCS11_CMD_GET_ATTRIBUTE_VALUE` or `entry_get_attribute_value()` can, with a bad template parameter, be tricked into reading at most 7 bytes beyond the end of the template buffer and writing beyond the end of the template buffer with the content of an attribute value of a PKCS#11 object. Commits e031c4e562023fd9f199e39fd2e85797e4cbdca9, 16926d5a46934c46e6656246b4fc18385a246900, and 149e8d7ecc4ef8bb00ab4a37fd2ccede6d79e1ca contain patches and are anticipated to be part of version 4.11.0.

An issue was discovered in Mbed TLS versions from 2.19.0 up to 3.6.5, Mbed TLS 4.0.0. Insufficient protection of serialized SSL context or session structures allows an attacker who can modify the serialized structures to induce memory corruption, leading to arbitrary code execution. This is caused by Incorrect Use of Privileged APIs.

An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API.

An issue was discovered in Mbed TLS 3.5.0 through 4.0.0. Client impersonation can occur while resuming a TLS 1.3 session.

An issue was discovered in Mbed TLS through 3.6.5 and 4.x through 4.0.0. There is a NULL pointer dereference in distinguished name parsing that allows an attacker to write to address 0.

An issue was discovered in Mbed TLS before 3.6.6 and 4.x before 4.1.0 and TF-PSA-Crypto before 1.1.0. There is a Predictable Seed in a Pseudo-Random Number Generator (PRNG).

Mbed TLS before 3.6.6 and TF-PSA-Crypto before 1.1.0 misuse seeds in a Pseudo-Random Number Generator (PRNG).

Mbed TLS 3.5.0 to 3.6.5 fixed in 3.6.6 and 4.1.0 has a buffer overflow in the x509_inet_pton_ipv6() function

An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys.

Mbed TLS v3.3.0 up to 3.6.5 and 4.0.0 allows Algorithm Downgrade.

In Mbed TLS 3.6.1 through 3.6.3 before 3.6.4, a timing discrepancy in block cipher padding removal allows an attacker to recover the plaintext when PKCS#7 padding mode is used.

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_import_public_key does not check that the input buffer is at least 4 bytes before reading a 32-bit field, allowing a possible out-of-bounds read on truncated input. Specifically, an out-of-bounds read in mbedtls_lms_import_public_key allows context-dependent attackers to trigger a crash or limited adjacent-memory disclosure by supplying a truncated LMS (Leighton-Micali Signature) public-key buffer under four bytes. An LMS public key starts with a 4-byte type indicator. The function mbedtls_lms_import_public_key reads this type indicator before validating the size of its input.

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_verify may accept invalid signatures if hash computation fails and internal errors go unchecked, enabling LMS (Leighton-Micali Signature) forgery in a fault scenario. Specifically, unchecked return values in mbedtls_lms_verify allow an attacker (who can induce a hardware hash accelerator fault) to bypass LMS signature verification by reusing stale stack data, resulting in acceptance of an invalid signature. In mbedtls_lms_verify, the return values of the internal Merkle tree functions create_merkle_leaf_value and create_merkle_internal_value are not checked. These functions return an integer that indicates whether the call succeeded or not. If a failure occurs, the output buffer (Tc_candidate_root_node) may remain uninitialized, and the result of the signature verification is unpredictable. When the software implementation of SHA-256 is used, these functions will not fail. However, with hardware-accelerated hashing, an attacker could use fault injection against the accelerator to bypass verification.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, in some cases of failed memory allocation or hardware errors, uses uninitialized stack memory to compose the TLS Finished message, potentially leading to authentication bypasses such as replays.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname.

Mbed TLS 3.5.x through 3.6.x before 3.6.2 has a buffer underrun in pkwrite when writing an opaque key pair

An issue was discovered in Mbed TLS 3.x before 3.6.1. With TLS 1.3, when a server enables optional authentication of the client, if the client-provided certificate does not have appropriate values in if keyUsage or extKeyUsage extensions, then the return value of mbedtls_ssl_get_verify_result() would incorrectly have the MBEDTLS_X509_BADCERT_KEY_USAGE and MBEDTLS_X509_BADCERT_KEY_USAGE bits clear. As a result, an attacker that had a certificate valid for uses other than TLS client authentication would nonetheless be able to use it for TLS client authentication. Only TLS 1.3 servers were affected, and only with optional authentication (with required authentication, the handshake would be aborted with a fatal alert).

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled.

An issue was discovered in Trusted Firmware-M through 2.0.0. The lack of argument verification in the logging subsystem allows attackers to read sensitive data via the login function.

Improper input validation in ARM® Trusted Firmware used in AMD’s Zynq™ UltraScale+™) MPSoC/RFSoC may allow a privileged attacker to perform out of bound reads, potentially resulting in data leakage and denial of service.

In Mbed TLS 3.3.0 through 3.5.2 before 3.6.0, a malicious client can cause information disclosure or a denial of service because of a stack buffer over-read (of less than 256 bytes) in a TLS 1.3 server via a TLS 3.1 ClientHello.

An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When negotiating the TLS version on the server side, it can fall back to the TLS 1.2 implementation of the protocol if it is disabled. If the TLS 1.2 implementation was disabled at build time, a TLS 1.2 client could put a TLS 1.3-only server into an infinite loop processing a TLS 1.2 ClientHello, resulting in a denial of service. If the TLS 1.2 implementation was disabled at runtime, a TLS 1.2 client can successfully establish a TLS 1.2 connection with the server.

An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When an SSL context was reset with the mbedtls_ssl_session_reset() API, the maximum TLS version to be negotiated was not restored to the configured one. An attacker was able to prevent an Mbed TLS server from establishing any TLS 1.3 connection, potentially resulting in a Denial of Service or forced version downgrade from TLS 1.3 to TLS 1.2.

An issue was discovered in Mbed TLS 2.18.0 through 2.28.x before 2.28.8 and 3.x before 3.6.0, and Mbed Crypto. The PSA Crypto API mishandles shared memory.

Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension().

An issue was discovered in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2. There was a timing side channel in RSA private operations. This side channel could be sufficient for a local attacker to recover the plaintext. It requires the attacker to send a large number of messages for decryption, as described in "Everlasting ROBOT: the Marvin Attack" by Hubert Kario.

An issue was discovered in Mbed TLS 3.5.1. There is persistent handshake denial if a client sends a TLS 1.3 ClientHello without extensions.

Mbed TLS 3.2.x through 3.4.x before 3.5 has a Buffer Overflow that can lead to remote Code execution.

Mbed TLS 2.x before 2.28.5 and 3.x before 3.5.0 has a Buffer Overflow.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20 and prior to version 3.22, `shdr_verify_signature` can make a double free. `shdr_verify_signature` used to verify a TA binary before it is loaded. To verify a signature of it, allocate a memory for RSA key. RSA key allocate function (`sw_crypto_acipher_alloc_rsa_public_key`) will try to allocate a memory (which is optee’s heap memory). RSA key is consist of exponent and modulus (represent as variable `e`, `n`) and it allocation is not atomic way, so it may succeed in `e` but fail in `n`. In this case sw_crypto_acipher_alloc_rsa_public_key` will free on `e` and return as it is failed but variable ‘e’ is remained as already freed memory address . `shdr_verify_signature` will free again that memory (which is `e`) even it is freed when it failed allocate RSA key. A patch is available in version 3.22. No known workarounds are available.

In Trusted Firmware-M through TF-Mv1.8.0, for platforms that integrate the CryptoCell accelerator, when the CryptoCell PSA Driver software Interface is selected, and the Authenticated Encryption with Associated Data Chacha20-Poly1305 algorithm is used, with the single-part verification function (defined during the build-time configuration phase) implemented with a dedicated function (i.e., not relying on usage of multipart functions), the buffer comparison during the verification of the authentication tag does not happen on the full 16 bytes but just on the first 4 bytes, thus leading to the possibility that unauthenticated payloads might be identified as authentic. This affects TF-Mv1.6.0, TF-Mv1.6.1, TF-Mv1.7.0, and TF-Mv1.8.

Use of a Broken or Risky Cryptographic Algorithm in the function mbedtls_mpi_exp_mod() in lignum.c in Mbed TLS Mbed TLS all versions before 3.0.0, 2.27.0 or 2.16.11 allows attackers with access to precise enough timing and memory access information (typically an untrusted operating system attacking a secure enclave such as SGX or the TrustZone secure world) to recover the private keys used in RSA.

Trusted Firmware-A through 2.8 has an out-of-bounds read in the X.509 parser for parsing boot certificates. This affects downstream use of get_ext and auth_nvctr. Attackers might be able to trigger dangerous read side effects or obtain sensitive information about microarchitectural state.

An unprotected memory-access operation in optee_os in TrustedFirmware Open Portable Trusted Execution Environment (OP-TEE) before 3.20 allows a physically proximate adversary to bypass signature verification and install malicious trusted applications via electromagnetic fault injections.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) can recover an RSA private key after observing the victim performing a single private-key operation, if the window size (MBEDTLS_MPI_WINDOW_SIZE) used for the exponentiation is 3 or smaller.

OP-TEE Trusted OS is the secure side implementation of OP-TEE project, a Trusted Execution Environment. Versions prior to 3.19.0, contain an Improper Validation of Array Index vulnerability. The function `cleanup_shm_refs()` is called by both `entry_invoke_command()` and `entry_open_session()`. The commands `OPTEE_MSG_CMD_OPEN_SESSION` and `OPTEE_MSG_CMD_INVOKE_COMMAND` can be executed from the normal world via an OP-TEE SMC. This function is not validating the `num_params` argument, which is only limited to `OPTEE_MSG_MAX_NUM_PARAMS` (127) in the function `get_cmd_buffer()`. Therefore, an attacker in the normal world can craft an SMC call that will cause out-of-bounds reading in `cleanup_shm_refs` and potentially freeing of fake-objects in the function `mobj_put()`. A normal-world attacker with permission to execute SMC instructions may exploit this flaw. Maintainers believe this problem permits local privilege escalation from the normal world to the secure world. Version 3.19.0 contains a fix for this issue. There are no known workarounds.

An issue was discovered in Mbed TLS before 2.28.1 and 3.x before 3.2.0. In some configurations, an unauthenticated attacker can send an invalid ClientHello message to a DTLS server that causes a heap-based buffer over-read of up to 255 bytes. This can cause a server crash or possibly information disclosure based on error responses. Affected configurations have MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE enabled and MBEDTLS_SSL_IN_CONTENT_LEN less than a threshold that depends on the configuration: 258 bytes if using mbedtls_ssl_cookie_check, and possibly up to 571 bytes with a custom cookie check function.

Trusted Firmware M 1.4.x through 1.4.1 has a buffer overflow issue in the Firmware Update partition. In the IPC model, a psa_fwu_write caller from SPE or NSPE can overwrite stack memory locations.

Trusted Firmware-M (TF-M) 1.4.0, when Profile Small is used, has incorrect access control. NSPE can access a secure key (held by the Crypto service) based solely on knowledge of its key ID. For example, there is no authorization check associated with the relationship between a caller and a key owner.

In Mbed TLS before 2.28.0 and 3.x before 3.1.0, psa_cipher_generate_iv and psa_cipher_encrypt allow policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application.

Mbed TLS before 3.0.1 has a double free in certain out-of-memory conditions, as demonstrated by an mbedtls_ssl_set_session() failure.

An issue was discovered in Trusted Firmware OP-TEE Trusted OS through 3.15.0. The OPTEE-OS CSU driver for NXP i.MX6UL SoC devices lacks security access configuration for wakeup-related registers, resulting in TrustZone bypass because the NonSecure World can perform arbitrary memory read/write operations on Secure World memory. This involves a v cycle.

The OPTEE-OS CSU driver for NXP i.MX SoC devices lacks security access configuration for several models, resulting in TrustZone bypass because the NonSecure World can perform arbitrary memory read/write operations on Secure World memory. This involves a DMA capable peripheral.

In Linaro OP-TEE before 3.7.0, by using inconsistent or malformed data, it is possible to call update and final cryptographic functions directly, causing a crash that could leak sensitive information.

In Arm Trusted Firmware M through 1.2, the NS world may trigger a system halt, an overwrite of secure data, or the printing out of secure data when calling secure functions under the NSPE handler mode.

In Trusted Firmware-M through 1.3.0, cleaning up the memory allocated for a multi-part cryptographic operation (in the event of a failure) can prevent the abort() operation in the associated cryptographic library from freeing internal resources, causing a memory leak.

Western Digital has identified a security vulnerability in the Replay Protected Memory Block (RPMB) protocol as specified in multiple standards for storage device interfaces, including all versions of eMMC, UFS, and NVMe. The RPMB protocol is specified by industry standards bodies and is implemented by storage devices from multiple vendors to assist host systems in securing trusted firmware. Several scenarios have been identified in which the RPMB state may be affected by an attacker without the knowledge of the trusted component that uses the RPMB feature.

An issue was discovered in Arm Mbed TLS before 2.16.6 and 2.7.x before 2.7.15. An attacker that can get precise enough side-channel measurements can recover the long-term ECDSA private key by (1) reconstructing the projective coordinate of the result of scalar multiplication by exploiting side channels in the conversion to affine coordinates; (2) using an attack described by Naccache, Smart, and Stern in 2003 to recover a few bits of the ephemeral scalar from those projective coordinates via several measurements; and (3) using a lattice attack to get from there to the long-term ECDSA private key used for the signatures. Typically an attacker would have sufficient access when attacking an SGX enclave and controlling the untrusted OS.

Arm Mbed TLS before 2.19.0 and Arm Mbed Crypto before 2.0.0, when deterministic ECDSA is enabled, use an RNG with insufficient entropy for blinding, which might allow an attacker to recover a private key via side-channel attacks if a victim signs the same message many times. (For Mbed TLS, the fix is also available in versions 2.7.12 and 2.16.3.)

Linaro/OP-TEE OP-TEE Prior to version v3.4.0 is affected by: Boundary checks. The impact is: This could lead to corruption of any memory which the TA can access. The component is: optee_os. The fixed version is: v3.4.0.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Code execution in the context of TEE core (kernel). The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Execution of code in TEE core (kernel) context. The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Code execution in context of TEE core (kernel). The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Memory corruption and disclosure of memory content. The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Rounding error. The impact is: Potentially leaking code and/or data from previous Trusted Application. The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Boundary crossing. The impact is: Memory corruption of the TEE itself. The component is: optee_os. The fixed version is: 3.4.0 and later.

ARM Trusted Firmware-A allows information disclosure.

In all versions of ARM Trusted Firmware up to and including v1.4, not initializing or saving/restoring the PMCR_EL0 register can leak secure world timing information.

Arm Mbed TLS before 2.14.1, before 2.7.8, and before 2.1.17 allows a local unprivileged attacker to recover the plaintext of RSA decryption, which is used in RSA-without-(EC)DH(E) cipher suites.

LibTomCrypt through 1.18.1 allows a memory-cache side-channel attack on ECDSA signatures, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.

ARM mbed TLS before 2.1.11, before 2.7.2, and before 2.8.0 has a buffer over-read in ssl_parse_server_psk_hint() that could cause a crash on invalid input.

ARM mbed TLS before 2.1.11, before 2.7.2, and before 2.8.0 has a buffer over-read in ssl_parse_server_key_exchange() that could cause a crash on invalid input.

The BL1 FWU SMC handling code in ARM Trusted Firmware before 1.4 might allow attackers to write arbitrary data to secure memory, bypass the bl1_plat_mem_check protection mechanism, cause a denial of service, or possibly have unspecified other impact via a crafted AArch32 image, which triggers an integer overflow.

ARM mbed TLS before 1.3.21 and 2.x before 2.1.9, if optional authentication is configured, allows remote attackers to bypass peer authentication via an X.509 certificate chain with many intermediates. NOTE: although mbed TLS was formerly known as PolarSSL, the releases shipped with the PolarSSL name are not affected.

In ARM Trusted Firmware through 1.3, the secure self-hosted invasive debug interface allows normal world attackers to cause a denial of service (secure world panic) via vectors involving debug exceptions and debug registers.

In ARM Trusted Firmware 1.3, RO memory is always executable at AArch64 Secure EL1, allowing attackers to bypass the MT_EXECUTE_NEVER protection mechanism. This issue occurs because of inconsistency in the number of execute-never bits (one bit versus two bits).

An exploitable free of a stack pointer vulnerability exists in the x509 certificate parsing code of ARM mbed TLS before 1.3.19, 2.x before 2.1.7, and 2.4.x before 2.4.2. A specially crafted x509 certificate, when parsed by mbed TLS library, can cause an invalid free of a stack pointer leading to a potential remote code execution. In order to exploit this vulnerability, an attacker can act as either a client or a server on a network to deliver malicious x509 certificates to vulnerable applications.

The rsa_verify_hash_ex function in rsa_verify_hash.c in LibTomCrypt, as used in OP-TEE before 2.2.0, does not validate that the message length is equal to the ASN.1 encoded data length, which makes it easier for remote attackers to forge RSA signatures or public certificates by leveraging a Bleichenbacher signature forgery attack.

Heap-based buffer overflow in ARM mbed TLS (formerly PolarSSL) 1.3.x before 1.3.14 and 2.x before 2.1.2 allows remote SSL servers to cause a denial of service (client crash) and possibly execute arbitrary code via a long session ticket name to the session ticket extension, which is not properly handled when creating a ClientHello message to resume a session. NOTE: this identifier was SPLIT from CVE-2015-5291 per ADT3 due to different affected version ranges.

Heap-based buffer overflow in PolarSSL 1.x before 1.2.17 and ARM mbed TLS (formerly PolarSSL) 1.3.x before 1.3.14 and 2.x before 2.1.2 allows remote SSL servers to cause a denial of service (client crash) and possibly execute arbitrary code via a long hostname to the server name indication (SNI) extension, which is not properly handled when creating a ClientHello message. NOTE: this identifier has been SPLIT per ADT3 due to different affected version ranges. See CVE-2015-8036 for the session ticket issue that was introduced in 1.3.0.