motorola CVE Vulnerabilities & Metrics

A denial-of-service vulnerability could allow an authenticated user to trigger an internal service restart via a specially crafted API request.

A command injection vulnerability could allow an authenticated user to execute operating system commands as root via a specially crafted API request.

A hidden interface in Motorola CX2L Router firmware v1.0.1 leaks information regarding the SystemWizardStatus component via sending a crafted request to device_web_ip.

An arbitrary firmware upload vulnerability exists in the Motorola MR2600. An attacker can exploit this vulnerability to achieve code execution on the device. Authentication is required, however can be bypassed.

An authentication bypass vulnerability exists in the web component of the Motorola MR2600. An attacker can exploit this vulnerability to access protected URLs and retrieve sensitive information.

A command injection vulnerability exists in the 'SaveStaticRouteIPv6Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.

A command injection vulnerability exists in the 'SaveStaticRouteIPv4Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.

A command injection vulnerability exists in the ‘SaveSysLogParams’ parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.

Motorola MTM5000 series firmwares lack properly configured memory protection of pages shared between the OMAP-L138 ARM and DSP cores. The SoC provides two memory protection units, MPU1 and MPU2, to enforce the trust boundary between the two cores. Since both units are left unconfigured by the firmwares, an adversary with control over either core can trivially gain code execution on the other, by overwriting code located in shared RAM or DDR2 memory regions.

The Motorola MTM5000 series firmwares generate TETRA authentication challenges using a PRNG using a tick count register as its sole entropy source. Low boottime entropy and limited re-seeding of the pool renders the authentication challenge vulnerable to two attacks. First, due to the limited boottime pool entropy, an adversary can derive the contents of the entropy pool by an exhaustive search of possible values, based on an observed authentication challenge. Second, an adversary can use knowledge of the entropy pool to predict authentication challenges. As such, the unit is vulnerable to CVE-2022-24400.

The Motorola MTM5000 series firmwares lack pointer validation on arguments passed to trusted execution environment (TEE) modules. Two modules are used, one responsible for KVL key management and the other for TETRA cryptographic functionality. In both modules, an adversary with non-secure supervisor level code execution can exploit the issue in order to gain secure supervisor code execution within the TEE. This constitutes a full break of the TEE module, exposing the device key as well as any TETRA cryptographic keys and the confidential TETRA cryptographic primitives.

A format string vulnerability exists in Motorola MTM5000 series firmware AT command handler for the AT+CTGL command. An attacker-controllable string is improperly handled, allowing for a write-anything-anywhere scenario. This can be leveraged to obtain arbitrary code execution inside the teds_app binary, which runs with root privileges.

Motorola EBTS/MBTS Site Controller drops to debug prompt on unhandled exception. The Motorola MBTS Site Controller exposes a debug prompt on the device's serial port in case of an unhandled exception. This allows an attacker with physical access that is able to trigger such an exception to extract secret key material and/or gain arbitrary code execution on the device.

Motorola EBTS/MBTS Base Radio fails to check firmware authenticity. The Motorola MBTS Base Radio lacks cryptographic signature validation for firmware update packages, allowing an authenticated attacker to gain arbitrary code execution, extract secret key material, and/or leave a persistent implant on the device.

Motorola MBTS Site Controller fails to check firmware update authenticity. The Motorola MBTS Site Controller lacks cryptographic signature validation for firmware update packages, allowing an authenticated attacker to gain arbitrary code execution, extract secret key material, and/or leave a persistent implant on the device.

Motorola MBTS Base Radio accepts hard-coded backdoor password. The Motorola MBTS Base Radio Man Machine Interface (MMI), allowing for service technicians to diagnose and configure the device, accepts a hard-coded backdoor password that cannot be changed or disabled.

Motorola MBTS Site Controller accepts hard-coded backdoor password. The Motorola MBTS Site Controller Man Machine Interface (MMI), allowing for service technicians to diagnose and configure the device, accepts a hard-coded backdoor password that cannot be changed or disabled.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the tomography_ping_number parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the smartqos_priority_devices parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the system_time_timezone parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the staticroute_list parameter.

An improper input sanitization vulnerability in the Motorola MR2600 router could allow a local user with elevated permissions to execute arbitrary code.

Improper access control of bootloader function was discovered in Motorola Mobility Motorola e20 prior to version RONS31.267-38-8 allows attacker with local access to read partition or RAM data.

The Motorola MOSCAD and ACE line of RTUs through 2022-05-02 omit an authentication requirement. They feature IP Gateway modules which allow for interfacing between Motorola Data Link Communication (MDLC) networks (potentially over a variety of serial, RF and/or Ethernet links) and TCP/IP networks. Communication with RTUs behind the gateway is done by means of the proprietary IPGW protocol (5001/TCP). This protocol does not have any authentication features, allowing any attacker capable of communicating with the port in question to invoke (a subset of) desired functionality.

The Motorola ACE1000 RTU through 2022-05-02 uses ECB encryption unsafely. It can communicate with an XRT LAN-to-radio gateway by means of an embedded client. Credentials for accessing this gateway are stored after being encrypted with the Tiny Encryption Algorithm (TEA) in ECB mode using a hardcoded key. Similarly, the ACE1000 RTU can route MDLC traffic over Extended Command and Management Protocol (XCMP) and Network Layer (XNL) networks via the MDLC driver. Authentication to the XNL port is protected by TEA in ECB mode using a hardcoded key.

The Motorola ACE1000 RTU through 2022-05-02 mishandles firmware integrity. It utilizes either the STS software suite or ACE1000 Easy Configurator for performing firmware updates. In case of the Easy Configurator, firmware updates are performed through access to the Web UI where file system, kernel, package, bundle, or application images can be installed. Firmware updates for the Front End Processor (FEP) module are performed via access to the SSH interface (22/TCP), where a .hex file image is transferred and a bootloader script invoked. File system, kernel, package, and bundle updates are supplied as RPM (RPM Package Manager) files while FEP updates are supplied as S-rec files. In all cases, firmware images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks.

The Motorola ACE1000 RTU through 2022-05-02 ships with a hardcoded SSH private key and initialization scripts (such as /etc/init.d/sshd_service) only generate a new key if no private-key file exists. Thus, this hardcoded key is likely to be used by default.

The Motorola ACE1000 RTU through 2022-05-02 has default credentials. It exposes an SSH interface on port 22/TCP. This interface is used for remote maintenance and for SFTP file-transfer operations that are part of engineering software functionality. Access to this interface is controlled by 5 preconfigured accounts (root, abuilder, acelogin, cappl, ace), all of which come with default credentials. Although the ACE1000 documentation mentions the root, abuilder and acelogin accounts and instructs users to change the default credentials, the cappl and ace accounts remain undocumented and thus are unlikely to have their credentials changed.

Motorola ACE1000 RTUs through 2022-05-02 mishandle application integrity. They allow for custom application installation via either STS software, the C toolkit, or the ACE1000 Easy Configurator. In the case of the Easy Configurator, application images (as PLX/DAT/APP/CRC files) are uploaded via the Web UI. In case of the C toolkit, they are transferred and installed using SFTP/SSH. In each case, application images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks.

A privilege escalation vulnerability was reported in the MM1000 device configuration web server, which could allow privileged shell access and/or arbitrary privileged commands to be executed on the adapter.

The Motorola MM1000 device configuration portal can be accessed without authentication, which could allow adapter settings to be modified.

An command injection vulnerability in HNAP1/SetWLanApcliSettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary system commands.

An issue in HNAP1/GetMultipleHNAPs of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to access the components GetStationSettings, GetWebsiteFilterSettings and GetNetworkSettings without authentication.

A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code.

An issue was discovered in Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n where authentication to download the Syslog could be bypassed.

An issue was discovered in Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n where the admin password and private key could be found in the log tar package.

A vulnerability in /Login.html of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to bypass login and obtain a partially authorized token and uid.

The Motorola MH702x devices, prior to version 2.0.0.301, do not properly verify the server certificate during communication with the support server which could lead to the communication channel being accessible by an attacker.

Motorola FX9500 devices allow remote attackers to read database files.

Some Motorola devices include the SIMalliance Toolbox Browser (aka S@T Browser) on the UICC, which might allow remote attackers to retrieve location and IMEI information, or retrieve other data or execute certain commands, via SIM Toolkit (STK) instructions in an SMS message, aka Simjacker.

An issue was discovered in OpenWrt libuci (aka Library for the Unified Configuration Interface) before 15.05.1 as used on Motorola CX2L MWR04L 1.01 and C1 MWR03 1.01 devices. /tmp/.uci/network locking is mishandled after reception of a long SetWanSettings command, leading to a device hang.

On the Motorola router CX2L MWR04L 1.01, there is a stack consumption (infinite recursion) issue in scopd via TCP port 8010 and UDP port 8080. It is caused by snprintf and inappropriate length handling.

An issue was discovered in scopd on Motorola routers CX2 1.01 and M2 1.01. There is a Use of an Externally Controlled Format String, reachable via TCP port 8010 or UDP port 8080.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function startRmtAssist in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. The router opens TCP port 8010. Users can send hnap requests to this port without authentication to obtain information such as the MAC addresses of connected client devices.

In Motorola CX2 1.01 and M2 1.01, users can access the router's /priv_mgt.html web page to launch telnetd, as demonstrated by the 192.168.51.1 address.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function downloadFirmware in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetSmartQoSSettings API function, as demonstrated by shell metacharacters in the smartqos_priority_devices field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWLanACLSettings API function, as demonstrated by shell metacharacters in the wl(0).(0)_maclist field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteSettings API function, as demonstrated by shell metacharacters in the staticroute_list field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetNTPServerSettings API function, as demonstrated by shell metacharacters in the system_time_timezone field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetNetworkTomographySettings API function, as demonstrated by shell metacharacters in the tomography_ping_number field.

Motorola SBG901 SBG901-2.10.1.1-GA-00-581-NOSH, SBG941 SBG941-2.11.0.0-GA-07-624-NOSH, and SVG1202 SVG1202-2.1.0.0-GA-14-LTSH devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

The Motorola MBP853 firmware does not correctly validate server certificates. This allows for a Man in The Middle (MiTM) attack to take place between a Motorola MBP853 camera and the servers it communicates with. In one such instance, it was identified that the device was downloading what appeared to be a client certificate.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) and Xfinity XR11-20 Voice Remote devices allows local users to upload arbitrary firmware images to an XR11 by leveraging root access. In other words, there is no protection mechanism involving digital signatures for the firmware.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows physically proximate attackers to read arbitrary files by pressing "EXIT, Down, Down, 2" on an RF4CE remote to reach the diagnostic display, and then launching a Remote Web Inspector script.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows remote attackers to enable a Remote Web Inspector that is accessible from the public Internet.

Cross-site request forgery (CSRF) vulnerability in Motorola Solutions MOSCAD IP Gateway allows remote attackers to hijack the authentication of administrators for requests that modify a password.

Motorola Solutions MOSCAD IP Gateway allows remote attackers to read arbitrary files via unspecified vectors.

Motorola Scanner SDK uses weak permissions for (1) CoreScanner.exe, (2) rsmdriverproviderservice.exe, and (3) ScannerService.exe, which allows local users to gain privileges via unspecified vectors.

Multiple stack-based buffer overflows in Motorola Scanner SDK allow remote attackers to execute arbitrary code via a crafted string to the Open method in (1) IOPOSScanner.ocx or (2) IOPOSScale.ocx.

Stack-based buffer overflow in the sub_E110 function in init in a certain configuration of Android 2.3.7 on the Motorola Defy XT phone for Republic Wireless allows local users to gain privileges or cause a denial of service (memory corruption) by writing a long string to the /dev/socket/init_runit socket that is inconsistent with a certain length value that was previously written to this socket.

A certain configuration of Android 2.3.7 on the Motorola Defy XT phone for Republic Wireless uses init to create a /dev/socket/init_runit socket that listens for shell commands, which allows local users to gain privileges by interacting with a LocalSocket object.

The TrustZone kernel, when used in conjunction with a certain Motorola build of Android 4.1.2, on Motorola Razr HD, Razr M, and Atrix HD devices with the Qualcomm MSM8960 chipset does not verify the association between a certain physical-address argument and a memory region, which allows local users to unlock the bootloader by using kernel mode to perform crafted 0x9 and 0x2 SMC operations, a different vulnerability than CVE-2013-2596.

Integer overflow in the fb_mmap function in drivers/video/fbmem.c in the Linux kernel before 3.8.9, as used in a certain Motorola build of Android 4.1.2 and other products, allows local users to create a read-write memory mapping for the entirety of kernel memory, and consequently gain privileges, via crafted /dev/graphics/fb0 mmap2 system calls, as demonstrated by the Motochopper pwn program.

Multiple directory traversal vulnerabilities in the web server for Motorola SURFBoard cable modem SBV6120E running firmware SBV6X2X-1.0.0.5-SCM-02-SHPC allow remote attackers to read arbitrary files via (1) "//" (multiple leading slash), (2) ../ (dot dot) sequences, and encoded dot dot sequences in a URL request.

Stack-based buffer overflow in Motorola Timbuktu Pro 8.6.5 on Windows allows remote attackers to execute arbitrary code by sending a long malformed string over the PlughNTCommand named pipe.

Cross-site scripting (XSS) vulnerability in sysconf.cgi in Motorola Wimax modem CPEi300 allows remote authenticated users to inject arbitrary web script or HTML via the page parameter.

Directory traversal vulnerability in sysconf.cgi in Motorola Wimax modem CPEi300 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the page parameter.

Stack-based buffer overflow in the JPEG thumbprint component in the EXIF parser on Motorola cell phones with RAZR firmware allows user-assisted remote attackers to execute arbitrary code via an MMS transmission of a malformed JPEG image, which triggers memory corruption.

Multiple cross-site request forgery (CSRF) vulnerabilities on Motorola Surfboard with software SB5100-2.3.3.0-SCM00-NOSH allow remote attackers to (1) cause a denial of service (device reboot) via the "Restart Cable Modem" value in the BUTTON_INPUT parameter to configdata.html, and (2) cause a denial of service (hard reset) via the "Reset All Defaults" value in the BUTTON_INPUT parameter to configdata.html.

The NantSys device 5.0.0.115 in Motorola netOctopus 5.1.2 build 1011 has weak permissions for the \\.\NantSys device interface (nantsys.sys), which allows local users to gain privileges or cause a denial of service (system crash), as demonstrated by modifying the SYSENTER_EIP_MSR CPU Model Specific Register (MSR) value.

Multiple buffer overflows in Motorola Timbuktu Pro before 8.6.5 for Windows allow remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via (1) a long user name and (2) certain malformed requests; and (3) allow remote Timbuktu servers to have an unknown impact via a malformed HELLO response, related to the Scanner component and possibly related to a malformed computer name.

Directory traversal vulnerability in Motorola Timbuktu Pro before 8.6.5 for Windows allows remote attackers to create or delete arbitrary files via a .. (dot dot) in a Send request, probably related to the (1) Send and (2) Exchange services.

The Motorola MOTORAZR V3 phone allows remote attackers to cause a denial of service (continual modal dialogs and UI unavailability) by repeatedly trying to OBEX push a file over Bluetooth, as demonstrated by ussp-push.

The HTTP interface in the Motorola SURFboard SB4200 Cable Modem allows remote attackers to cause a denial of service (device crash) via a request with MfcISAPICommand set to SecretProc and a long string in the Secret parameter.

Buffer overflow in the Motorola PEBL U6 08.83.76R, and possibly other Motorola P2K-based phones, allows remote attackers to cause a denial of service (device shutdown), and possibly execute arbitrary code, via a long OBEX setpath to the OBEX File Transfer (aka FTP) service on Bluetooth channel 9.

The Motorola PEBL U6 08.83.76R, the Motorola V600, and possibly the Motorola E398 and other Motorola P2K-based phones does not require pairing for a connection related to the Headset Audio Gateway service, which allows user-assisted remote attackers to obtain AT level access and view phonebook entries and saved SMS messages by connecting on Bluetooth channel 3 and tricking the user into pressing Grant, aka a "Blueline" attack. NOTE: while user-assisted, the attack is made more feasible because of a GUI misrepresentation issue that allows a default message to be replaced by an attacker-specified one.

The Motorola PEBL U6, the Motorola V600, and possibly the Motorola E398 and other Motorola phones allow remote attackers to add an entry for their own Bluetooth device to a target device's list of trusted devices (aka Device History), and possibly obtain AT level access to the target device, by initiating and interrupting an OBEX Push Profile that pretends to send a vCard, aka a "HeloMoto" attack.

Motorola SB5100E Cable Modem allows remote attackers to cause a denial of service (device crash) via an IP packet with the same source and destination IPs and ports, and with the SYN flag set (aka LAND).

Motorola Wireless Router WR850G running firmware 4.03 allows remote attackers to bypass authentication, log on as an administrator, and obtain sensitive information by repeatedly making an HTTP request for ver.asp until an administrator logs on.

Motorola Surfboard 4200 cable modem allows remote attackers to cause a denial of service (crash) by performing a SYN scan using a tool such as nmap.

The Motorola CableRouter allows any remote user to connect to and configure the router on port 1024.

A memory leak in a Motorola CableRouter allows remote attackers to conduct a denial of service via a large number of telnet connections.