CVE-2013-3665 Vulnerability Analysis & Exploit Details

CVE-2013-3665
Vulnerability Scoring

6.8
/10
High Risk

Without proper mitigation, CVE-2013-3665 could pose a significant security threat.

Attack Complexity Details

  • Attack Complexity: Medium
    Attack Complexity Analysis In Progress
  • Attack Vector: Network
    Vulnerability is exploitable over a network without physical access.
  • Privileges Required: None
    No authentication is required for exploitation.
  • Scope:
    Impact is confined to the initially vulnerable component.
  • User Interaction: None
    No user interaction is necessary for exploitation.

CVE-2013-3665 Details

Status: Analyzed

Last updated: 🕓 29 Jul 2013, 04:00 UTC
Originally published on: 🕟 18 Jul 2013, 16:51 UTC

Time between publication and last update: 10 days

CVSS Release: version 2

CVE-2013-3665 Vulnerability Summary

CVE-2013-3665: Unspecified vulnerability in Autodesk AutoCAD through 2014, AutoCAD LT through 2014, and DWG TrueView through 2014 allows remote attackers to execute arbitrary code via a crafted DWG file.

Assessing the Risk of CVE-2013-3665

Access Complexity Graph

The exploitability of CVE-2013-3665 depends on two key factors: attack complexity (the level of effort required to execute an exploit) and privileges required (the access level an attacker needs).

Exploitability Analysis for CVE-2013-3665

Moderate complexity but no authentication required makes CVE-2013-3665 a potential risk.

Understanding AC and PR

A lower complexity and fewer privilege requirements make exploitation easier. Security teams should evaluate these aspects to determine the urgency of mitigation strategies, such as patch management and access control policies.

Attack Complexity (AC) measures the difficulty in executing an exploit. A high AC means that specific conditions must be met, making an attack more challenging, while a low AC means the vulnerability can be exploited with minimal effort.

Privileges Required (PR) determine the level of system access necessary for an attack. Vulnerabilities requiring no privileges are more accessible to attackers, whereas high privilege requirements limit exploitation to authorized users with elevated access.

CVSS Score Breakdown Chart

Above is the CVSS Sub-score Breakdown for CVE-2013-3665, illustrating how Base, Impact, and Exploitability factors combine to form the overall severity rating. A higher sub-score typically indicates a more severe or easier-to-exploit vulnerability.

CIA Impact Analysis

Below is the Impact Analysis for CVE-2013-3665, showing how Confidentiality, Integrity, and Availability might be affected if the vulnerability is exploited. Higher values usually signal greater potential damage.

  • Confidentiality: None
    CVE-2013-3665 does not compromise confidentiality.
  • Integrity: None
    CVE-2013-3665 does not impact data integrity.
  • Availability: None
    CVE-2013-3665 does not affect system availability.

Exploit Prediction Scoring System (EPSS)

The EPSS score estimates the probability that this vulnerability will be exploited in the near future.

EPSS Score: 0.481% (probability of exploit)

EPSS Percentile: 76.07% (lower percentile = lower relative risk)
This vulnerability is less risky than approximately 23.930000000000007% of others.

CVE-2013-3665 References

External References

CWE Common Weakness Enumeration

NVD-CWE-noinfo

Vulnerable Configurations

  • cpe:2.3:a:autodesk:autocad:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_architecture:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_architecture:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_architecture:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_architecture:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_architecture:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_architecture:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_architecture:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_architecture:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_civil_3d:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_civil_3d:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_civil_3d:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_civil_3d:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_civil_3d:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_civil_3d:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_civil_3d:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_civil_3d:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_ecscad:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_ecscad:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_ecscad:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_ecscad:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_ecscad:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_ecscad:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_ecscad:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_ecscad:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_electrical:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_electrical:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_electrical:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_electrical:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_electrical:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_electrical:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_electrical:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_electrical:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_lt:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_lt:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_lt:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_lt:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_lt:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_lt:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_lt:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_lt:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_map_3d:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_map_3d:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_map_3d:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_map_3d:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_map_3d:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_map_3d:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_map_3d:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_map_3d:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mechanical:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mechanical:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mechanical:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mechanical:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mechanical:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mechanical:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mechanical:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mechanical:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mep:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mep:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mep:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mep:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mep:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mep:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_mep:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_mep:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_p\&id:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_p\&id:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_p\&id:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_p\&id:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_p\&id:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_p\&id:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_p\&id:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_p\&id:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_plant_3d:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_plant_3d:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_plant_3d:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_plant_3d:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_plant_3d:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_plant_3d:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_plant_3d:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_plant_3d:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_structural_detailing:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_structural_detailing:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_structural_detailing:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_structural_detailing:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_structural_detailing:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_structural_detailing:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_structural_detailing:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_structural_detailing:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_utility_design:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_utility_design:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_utility_design:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_utility_design:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_utility_design:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_utility_design:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:autocad_utility_design:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:autocad_utility_design:2014:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:dwg_trueview:2011:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:dwg_trueview:2011:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:dwg_trueview:2012:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:dwg_trueview:2012:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:dwg_trueview:2013:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:dwg_trueview:2013:*:*:*:*:*:*:*
  • cpe:2.3:a:autodesk:dwg_trueview:2014:*:*:*:*:*:*:*
    cpe:2.3:a:autodesk:dwg_trueview:2014:*:*:*:*:*:*:*

Protect Your Infrastructure against CVE-2013-3665: Combat Critical CVE Threats

Stay updated with real-time CVE vulnerabilities and take action to secure your systems. Enhance your cybersecurity posture with the latest threat intelligence and mitigation techniques. Develop the skills necessary to defend against CVEs and secure critical infrastructures. Join the top cybersecurity professionals safeguarding today's infrastructures.

Other 5 Recently Published CVEs Vulnerabilities

  • CVE-2025-2129 – A vulnerability was found in Mage AI 0.9.75. It has been classified as problematic. This affects an unknown part. The manipulation leads to insecur...
  • CVE-2025-2127 – A vulnerability was found in JoomlaUX JUX Real Estate 3.4.0 on Joomla. It has been classified as problematic. Affected is an unknown function of th...
  • CVE-2025-2126 – A vulnerability was found in JoomlaUX JUX Real Estate 3.4.0 on Joomla and classified as critical. This issue affects some unknown processing of the...
  • CVE-2025-2125 – A vulnerability has been found in Control iD RH iD 25.2.25.0 and classified as problematic. This vulnerability affects unknown code of the file /v2...
  • CVE-2025-2124 – A vulnerability, which was classified as problematic, was found in Control iD RH iD 25.2.25.0. This affects an unknown part of the file /v2/custome...